China best Manufacturer Price Customized Metal Bevel Spur Differential Steering Spline Stainless Steel Gear Small Worm Gear spiral bevel gear

Product Description

Manufacturer Price Customized Metal Bevel Spur Differential Steering Spline Stainless Steel Gear Small Worm Gear

Product Description

 

Quality requirements for finished gear processing products

1. The accuracy of tooth profile machining during gear machining must meet the specified technical requirements.

2. The planar and curved shapes of gears should comply with the positional relationships and dimensional requirements shown on the drawings.

3. The surface of the gear should be sharp and free of rust, and the surface roughness should meet the specified requirements, requiring a smooth surface.

4. After the gear processing is completed, it needs to be inspected to ensure that it can be used normally and meet the performance indicators required by the design.

Production Capacity

Main products Custom Open Die Forging, Main Shaft, Wind Power Shaft, Stabilizer, Flange, Coupling, Tube Plate, Roller Forging, Roller Shell, Ring Forging.
Materials Carbon steel, Alloy steel, Stainless steel.
Supplying range Shafts, Sleeves, Rings, Cylinders, Blocks, Modules etc
QA DOC Chemical Composition Report, Mechanical Properties Report, UT Report, Heat Treatment Report, Dimensions Check Report

Production Process

1.Sliding wire feeding

Cut the steel ingot into reasonable sizes and weights according to product requirements

2.Heating(including tempering)

The heating equipment mainly consists of single chamber furnaces,push rod furnaces,and desktop annealing furnaces.All heating furnaces use natural gas as fuel.The heating temperature of steel ingots is generally between 1150ºCand 1240ºC,and the heating time of cold steel ingots is about 1-5 hours.The heating time of hot steel ingots,and the heated steel ingots enter the forging process.

3.Forging

The steel ingot is heated to around 1150-1240ºC and taken out of the heating furnace.Then,it is placed into an air hammer or an electro-hydraulic hammer by the operator.According to the size and forging ratio requirements of the steel ingot,corresponding processes such as pier thickness and elongation are carried out,and the size of the forging is monitored in real-time. The forging temperature is controlled by an infrared thermometer.

4.Inspection

Conduct preliminary inspection on the forging blank,mainly focusing on the inspection of appearance and size.In terms of appearance,the main inspection is to check whether there are cracks and other defects.In terms of size,it is necessary to ensure that the blank allowance is within the range required by the drawings and deep records

5.Heat treatment

A comprehensive process of heating a forging to a predetermined temperature,holding it for a certain period of time,and then cooling it at a predetermined speed to improve the internal structure and properties of the forging.Its purpose is to eliminate internal stress,prevent deformation during mechanical processing,and adjust the hardness to make the forging easier to cut.After heat treatment,the steel ingot is subjected to air cooling,and quenching treatment according to the material requirements.

 

We can produce different kinds of surface treatment after forging, such as machining, polishing, and plating.
We quote and produce the parts according to the drawings or samples from our customers. So if you are interested in our products and our company, please email us directly. 

Company Profile

Related products

For more products,please click here

Our Advantages

1.Good Quality with strict inspection process. control the tolerance up to +,-0.002MM.
2.Competitive Price and prompt delivery time.
3. International Quality Certified
4.Skilled workers
5.Warranty After-sales-service
 

FAQ

Q1: How can I get quote ?
A1: pls send us PDF,JPG,or other 2D files and 3D drawings. if you don;t have drawings. pls send me samples.

Q2: How you guarantee the quality?
A2: Our production will be strictly comply with the drawing requirements.we offer details photos and inspected reports to let you confirm before shipment.we will take the responsibilty for any quality issue.

Q3: What is payment term?
A3: 30% depoist in advance and the balance to be paid against the copy of BL.or LC at sight.

Q4: How about the shipment and package?
A4: If you have nominated forwarding company, we can contact him, if you don’t have .my company will organise the best-service forwarding company with the lowest shipping cost.

Q5: How to pack the cargos?
A5: If you have special packing request, pls send us design, my company will make the package exactly according to your designs.
or my company use our own good and standard package (carton or wooden box, or pallet or others according to different products )

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Processing Object: Metal
Molding Style: Forging
Molding Technics: Pressure Casting
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

bevel gear

What lubrication is required for a bevel gear?

Lubrication is crucial for the optimal performance, longevity, and reliability of bevel gears. Proper lubrication helps reduce friction, wear, and heat generation, ensuring smooth operation and efficient power transmission. Here’s a detailed explanation of the lubrication requirements for a bevel gear:

Bevel gears typically require a lubricant that provides sufficient film strength, viscosity, and protection against wear and corrosion. The specific lubrication requirements may vary depending on factors such as the gear material, operating conditions, load, speed, and environmental factors. It’s important to follow the manufacturer’s recommendations and guidelines for the appropriate lubricant to use in your specific application. Here are some key considerations:

  • Lubricant Type: Common lubricant types used for bevel gears include mineral oils, synthetic oils, and greases. Mineral oils are often suitable for standard applications, while synthetic oils offer enhanced performance in terms of temperature resistance, oxidation stability, and load-carrying capacity. Greases are used when a semi-solid lubricant is preferred, providing excellent adhesion and sealing properties.
  • Viscosity: The lubricant viscosity is crucial for maintaining an adequate lubricating film between the gear teeth. The viscosity should be selected based on the operating conditions, such as temperature and speed. Higher temperatures and speeds generally require lubricants with higher viscosity to ensure proper lubrication and prevent metal-to-metal contact.
  • Extreme Pressure (EP) Additives: In applications with high loads and potential for boundary lubrication conditions, lubricants with extreme pressure (EP) additives are recommended. EP additives provide additional protection against wear and ensure the lubricant film remains intact under high-pressure conditions, reducing the risk of gear tooth damage.
  • Corrosion Protection: Bevel gears operating in corrosive environments or exposed to moisture may require lubricants with corrosion inhibitors or rust-preventive additives. These additives help protect the gear surfaces from rust and corrosion, extending the gear’s lifespan and maintaining its performance.
  • Compatibility: It’s crucial to consider the compatibility between the lubricant and the gear materials. Some gear materials may have specific requirements or restrictions regarding the types of lubricants that can be used. For example, certain plastics or elastomers used in bevel gear applications may be sensitive to certain lubricant additives, necessitating the use of compatible lubricants.
  • Lubrication Method: The lubrication method for bevel gears can vary depending on the design and accessibility of the system. Lubrication can be performed through methods such as oil bath lubrication, oil mist lubrication, circulating oil systems, or grease application. The appropriate lubrication method should be determined based on the gear system’s design and the manufacturer’s recommendations.

It’s essential to regularly monitor the lubricant condition and perform maintenance tasks such as oil analysis, lubricant replenishment, or scheduled lubricant changes as recommended by the gear manufacturer or based on the operating conditions. This helps ensure the lubricant’s effectiveness and the overall performance of the bevel gear system.

In summary, the lubrication requirements for a bevel gear include selecting the appropriate lubricant type, considering viscosity, extreme pressure additives, corrosion protection, compatibility with gear materials, and choosing the suitable lubrication method. Following the manufacturer’s recommendations and performing regular maintenance tasks are essential to maintain proper lubrication and ensure optimal performance and longevity of the bevel gear system.

bevel gear

How do you ensure proper alignment when connecting a bevel gear?

Proper alignment is crucial when connecting a bevel gear to ensure efficient power transmission, smooth operation, and longevity of the gear system. Here’s a detailed explanation of how to ensure proper alignment:

When connecting a bevel gear, the following steps can help ensure proper alignment:

  • Check Gear Specifications: Begin by reviewing the gear specifications provided by the manufacturer. This includes information about the gear’s design, tolerances, and alignment requirements. Understanding these specifications is essential for achieving the desired alignment.
  • Prepare Mounting Surfaces: Ensure that the mounting surfaces for the gears, such as shafts or gearboxes, are clean, free from debris, and properly prepared. Any irregularities or surface defects can affect the alignment and lead to misalignment issues. Remove any burrs, nicks, or rough spots that could interfere with the proper seating of the gears.
  • Use Alignment Tools: Alignment tools, such as dial indicators or laser alignment systems, can be helpful in achieving precise alignment. These tools allow for accurate measurement and adjustment of the gear’s position relative to the mating components. Follow the instructions provided with the alignment tools to set up and perform the alignment process correctly.
  • Axial Alignment: Achieving proper axial alignment is crucial for bevel gears. The axial alignment refers to aligning the gear’s rotational axis parallel to the mating gear’s rotational axis. This ensures proper gear meshing and load distribution. Use alignment tools to measure and adjust the axial alignment, making necessary modifications to the gear’s position or shimming as required.
  • Radial Alignment: Radial alignment involves aligning the gear’s rotational axis perpendicular to the mating gear’s rotational axis. Proper radial alignment helps prevent side loads, excessive wear, and noise generation. Use alignment tools to measure and adjust the radial alignment, ensuring that the gear’s position is properly adjusted or shimmed to achieve the desired alignment.
  • Verify Tooth Contact Pattern: After aligning the gears, it is important to verify the tooth contact pattern. The tooth contact pattern should be evenly distributed across the gear tooth surfaces to ensure proper load sharing and minimize wear. Conduct a visual inspection or use specialized tools, such as gear marking compounds, to check and adjust the tooth contact pattern if necessary.

By following these steps and using appropriate alignment tools, you can ensure proper alignment when connecting a bevel gear. Proper alignment promotes efficient power transmission, minimizes wear, reduces noise, and extends the lifespan of the gear system.

It is worth noting that each gear system may have specific alignment requirements and considerations. Consult the gear manufacturer’s guidelines and best practices, as well as seek the expertise of experienced engineers, to ensure the proper alignment of bevel gears in your specific application.

bevel gear

How do bevel gears differ from other types of gears?

Bevel gears have distinct characteristics that set them apart from other types of gears. Here’s a detailed explanation of how bevel gears differ from other gears:

1. Tooth Geometry: Bevel gears have teeth cut on the cone-shaped surface of the gears, whereas other types of gears, such as spur gears and helical gears, have teeth cut on cylindrical surfaces. The tooth geometry of bevel gears allows them to accommodate intersecting shafts and transmit rotational motion at different angles.

2. Axis Orientation: Bevel gears have intersecting axes, meaning the shafts they are mounted on intersect each other. In contrast, other types of gears typically have parallel or skewed axes. The intersecting axis of bevel gears allows for changes in direction and allows for power transmission between shafts that are not in a straight line.

3. Types of Bevel Gears: Bevel gears come in different variations, including straight bevel gears, spiral bevel gears, and hypoid bevel gears. Straight bevel gears have straight-cut teeth and intersect at a 90-degree angle. Spiral bevel gears have curved teeth that are gradually cut along the gear surface, providing smoother engagement and reduced noise. Hypoid bevel gears have offset axes and are used when the intersecting shafts are non-parallel. Other types of gears, such as spur gears and helical gears, also have their own variations but do not typically involve intersecting axes.

4. Direction of Motion: Bevel gears can change the direction of rotational motion between intersecting shafts. Depending on the orientation of the gears, the direction of rotation can be reversed. This capability makes bevel gears suitable for applications where changes in direction are required. In contrast, other gears, such as spur gears and helical gears, transmit motion in a specific direction along parallel or skewed axes.

5. Load Distribution: Bevel gears distribute loads differently compared to other gears. Due to the conical shape of the gears, the contact area between the teeth changes as the gears rotate. This can result in varying load distribution along the gear teeth. Other gears, such as spur gears and helical gears, have a consistent load distribution along their teeth due to their cylindrical shape.

6. Applications: Bevel gears are commonly used in applications where changes in direction or speed of rotational motion are required, such as automotive differentials, marine propulsion systems, and power transmission systems. Other types of gears, such as spur gears and helical gears, are more commonly used in applications where parallel or skewed shafts are involved and changes in direction are not necessary.

While bevel gears have their unique characteristics, it’s important to note that different types of gears have their own advantages and applications. The selection of the appropriate gear type depends on factors such as the application requirements, operating conditions, space limitations, and load considerations.

In summary, bevel gears differ from other types of gears in terms of tooth geometry, axis orientation, types of variations available, direction of motion, load distribution, and applications. Their ability to accommodate intersecting shafts and change the direction of rotational motion makes them suitable for specific applications where other types of gears may not be as effective.

China best Manufacturer Price Customized Metal Bevel Spur Differential Steering Spline Stainless Steel Gear Small Worm Gear spiral bevel gearChina best Manufacturer Price Customized Metal Bevel Spur Differential Steering Spline Stainless Steel Gear Small Worm Gear spiral bevel gear
editor by CX 2024-01-10